Kies uw leveringslocatie

De keuze van de land/regio-pagina kan invloed hebben op verschillende factoren zoals prijs, verzendopties en beschikbaarheid van producten.
Mijn contactpersoon
igus® B.V.

Bezoekadres:

Sterrenbergweg 9

3769 BS Soesterberg

+31(0)346 353 932
NL(NL)

Besturingssysteem

De kosteneffectieve en individueel aanpasbare robotarmen van igus® kunnen worden aangevuld met verschillende besturingsconcepten. Er is een oplossing beschikbaar in de vorm van de industriële regelaar die wordt gemaakt door de firma Commonplace Robotics GmbH en speciaal is ontworpen voor robolink® D. Deze wordt geleverd met gemakkelijk te gebruiken software. Met behulp van de software worden de bewegingssequenties van de robot weergegeven en kunnen ze worden geprogrammeerd en bestuurd op een manier die gemakkelijk te begrijpen is. Het modulaire robolink® principe maakt de robotarmen ook bruikbaar met zelf geprogrammeerde regelaar, waardoor maximale modulariteit wordt geboden. Vanwege de combinatie van robolink® grijperarm en regelaar, kunnen monotone taken in bijv. kwaliteitsborging, assemblage of inbedrijfstelling gemakkelijk worden geautomatiseerd en ook moeiteloos worden gecoördineerd.
 

Aantal producten: 17

drylin® 7e as | UR Cap + besturingskast-integratie

  • Eenvoudige integratie in Universal Robots met UR CAP
  • Plug en play oplossing, aansluitklaar
  • Max. snelheid: 300 mm/s
op aanvraag
1 artikelen, waarvan verzendklaar:
1 in 48-72 uur
Naar de productpagina

Assembly kit D1 for two-axis-kinematics

Product information
  • Set consists of 2 x igus® D1 dryve, proximity switches incl. bracket, connection cables with straight connector in length 10m
 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve before you buy 
vanaf 1.564,21 EUR/St.
Naar de productpagina

igus® Robot Control Robot control for delta and gantry robots

Product information
  • Versatile automation tasks through simple programming software
  • For single axes, line, area and space gantries, delta robots
  • Simple software installation for Windows 10
  • Use via PC or tablet
  • 7 digital inputs/outputs, CRI interface, ModbusTCP (gateway from CANopen) for connection to master controllers such as Siemens or Beckhoff
  • 10m line length

All relevant documents can be found in the downloads below.

TEST BEFORE INVEST - Test the robot control even before purchase with the igus Robot Control Software 
op aanvraag
2 artikelen, waarvan verzendklaar:
2 in 3-4 werkdagen
Naar de productpagina

igus Robot Control Handheld

Product information
  • Handheld enables the robot to be commissioned and moved
  • Suitable for the igus Robot Control
  • Convenient operation for left and right-handers
  • User-friendly operation via touch display
op aanvraag
1 artikelen, waarvan verzendklaar:
1 in 48-72 uur
Naar de productpagina

Assembly kit D1 for 3-axis-kinematics

Product information
  • Set consists of 3x igus® D1 dryve, proximity switches incl. bracket, connection cables with straight connector in length 10m
 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve before you buy 
vanaf 2.346,32 EUR/St.
Naar de productpagina

igus® Robot Control Robot control for Scara and jointed-arm robots

Product information
  • Versatile automation tasks through simple programming software
  • For Scara robots and jointed-arm robots
  • Simple software installation for Windows 10
  • Use via PC or tablet
  • 7 digital inputs/outputs, CRI interface, ModbusTCP (gateway from CANopen) for connection to master controllers such as Siemens or Beckhof
  • 10m line length

All relevant documents can be found in the downloads below.


TEST BEFORE INVEST - Test the robot control even before purchase with the igus Robot Control Software.
op aanvraag
2 artikelen, waarvan verzendklaar:
2 in 3-4 werkdagen
Naar de productpagina

igus Robot Control I/O Modul

Product information
  • Extension to 7 additional digital inputs and outputs
  • Suitable for the igus Robot Control
  • Plug&Play solution
op aanvraag
1 artikelen, waarvan verzendklaar:
1 in 48-72 uur
Naar de productpagina

Control set D1 for 3-axis kinematics

Product information 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve before you buy 
vanaf 1.593,40 EUR/St.
Naar de productpagina

igus Robot Control motor modul

Product information
  • Extension of a motor module
  • Suitable for the igus Robot Control
  • Control of additional axes possible
  • Plug&Play solution
op aanvraag
2 artikelen, waarvan verzendklaar:
2 in 48-72 uur
Naar de productpagina

Controller kit D1 for two-axis-kinematics

Product information 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve before you buy 
vanaf 1.062,27 EUR/St.
Naar de productpagina

7th axis | UR Cap + control cabinet integration - 0,6 m/s version

Product information
  • Easy integration to Universal Robots with UR CAP
  • Plug & Play solution ready for connection
  • Control cabinet version
  • Cable set: 3 m
  • Max. Speed: 0,6 m/s

Optionally available
op aanvraag
1 artikelen, waarvan verzendklaar:
1 in 48-72 uur
Naar de productpagina

drylin® 7e as | EPSON Cap + schakelkastintegratie

  • Eenvoudige integratie in EPSON-robots met EPSON CAP
  • Plug en play oplossing, aansluitklaar
  • Max. snelheid: 300 mm/s
op aanvraag
1 artikelen, waarvan verzendklaar:
1 in 48-72 uur
Naar de productpagina
Nieuw

Controller kit D7 for 3-axis-kinematics

Product information
  • Without connection cables
  • Set consists of 3x drylin D7
 
  • Can control stepper motors with up to 2.7A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
vanaf 298,33 EUR/St.
1 artikelen, waarvan verzendklaar:
1 in 24-48 uur
Naar de productpagina

7th axis | UR Cap + control cabinet integration - Rotary axis

Product information
  • Easy integration to Universal Robots with UR CAP
  • Plug & Play solution ready for connection
  • Control cabinet version
  • Cable set: 3 m
  • Max. Speed: 8 rpm
 
Optionally available
op aanvraag
1 artikelen, waarvan verzendklaar:
1 in 48-72 uur
Naar de productpagina

7th axis | Control cabinet integration - IO Version

Product information
  • Easy integration to lightweight robots
  • Plug & Play solution ready for connection
  • Control cabinet
  • Cable set: 3 m
  • Max. Speed: 0,3 m/s

Optionally available
op aanvraag
1 artikelen, waarvan verzendklaar:
1 in 48-72 uur
Naar de productpagina

Advies

Verzending en advies

Persoonlijk:

Maandag t/m vrijdag van 7.00 uur - 20.00 uur.
Op zaterdagen van 8.00 uur tot - 12.00 uur.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.