Order fast

iglide® P

iglide® P: Cost effective and maintenance free

iglide® P plastic bushings offer low moisture absorption and are recommended for rotational applications and medium to high loads.

Personal contact

Ask the product expert

Variants

Sleeve bushing (inch sizes)

Flange bushing (inch sizes)

Sleeve bushing (metric sizes)

Flange bushing (metric sizes)


Part No. :
Shaft diameter d1 [inch]:
Bearing length b1 [inch]:
Outer diameter d2 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

Based on I.D.
f = .012 ➝ d1 .040” - .236”
f = .019 ➝ d1 > .236” - .472”
f = .031 ➝ d1 > .472” - 1.18”
f = .047 ➝ d1 > 1.18”

With the selected part you'll arrive at:

PDF file 3D-CAD Samples and catalog order

Application examples

Material data

Life time calculation

test method

installation

GToB Imprint General notes Data protection declaration


Part No. :
Shaft diameter d1 [inch]:
Bearing length b1 [inch]:
Flange thickness b2 [inch]:
Outer diameter d2 [inch]:
Flange diameter d3 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

b1-Tolerance :	h13
b2-Tolerance :	-0,14
d3-Tolerance :	d13

Based on I.D.
f = .012 ➝ d1 .040” - .236”
f = .019 ➝ d1 > .236” - .472”
f = .031 ➝ d1 > .472” - 1.18”
f = .047 ➝ d1 > 1.18”

With the selected part you'll arrive at:

PDF file 3D-CAD Samples and catalog order

Application examples

Material data

Life time calculation

test method

installation

GToB Imprint General notes Data protection declaration


Part No. :
Shaft diameter d1 [inch]:
Bearing length b1 [inch]:
Outer diameter d2 [inch]:
d1-Tolerance min. [inch]:
d1-Tolerance max. [inch]:

Based on I.D.
f = 0.3 ➝ d1 1 - 6 mm
f = 0.5 ➝ d1 > 6 - 12 mm
f = 0.8 ➝ d1 > 12 - 30 mm
f = 1.2 ➝ d1 > 30 mm

With the selected part you'll arrive at:

PDF file 3D-CAD Samples and catalog order

Application examples

Material data

Life time calculation

test method

installation

GToB Imprint General notes Data protection declaration


Part No. :
Shaft diameter d1 [inch]:
Bearing length b1 [inch]:
Flange thickness b2 [inch]:
Outer diameter d2 [inch]:
Flange diameter d3 [inch]:
d1-Tolerance min. [inch]:
d1-Tolerance max. [inch]:

b1-Tolerance :	h13
b2-Tolerance :	-0,14
d3-Tolerance :	d13

Based on I.D.
f = 0.3 ➝ d1 1 - 6 mm
f = 0.5 ➝ d1 > 6 - 12 mm
f = 0.8 ➝ d1 > 12 - 30 mm
f = 1.2 ➝ d1 > 30 mm

With the selected part you'll arrive at:

PDF file 3D-CAD Samples and catalog order

Application examples

Material data

Life time calculation

test method

installation

GToB Imprint General notes Data protection declaration

When to use iglide® P bushings?

When very low water absorption is needed
When a cost-effective bushing for high pressure loads is required
For rotational movements subject to high loads

When not to use them?

When the temperatures reach above 266°F
Instead try iglide® G300
When the bushing wall needs to be mechanicall reamed
Instead try iglide® M250
When the highest possible wear resistance is needed
Instead try iglide® L280